Hi Guys,
i plugged some balls with Vise CS Hybrid and a few went straight white/milky. Without adding color or somethin else.
Does anybody now why? Some balls stayd clear-ish and some white. I thought that i made everything the same way.
2 months ago i didnt hat any problems. Temperatur at the moment is about 25 C, Any ideas?
Thank your very much.
Vise CS Hybrid gets milky
Moderator: Moderators
Re: Vise CS Hybrid gets milky
I doubt if the temperature is the cause. 25C is the same as 77F.
-
- Pro Shop
- Posts: 140
- Joined: June 28th, 2010, 9:02 pm
- THS Average: 221
- Positive Axis Point: 4 3/8" X 0
- Speed: 16.5-17.5
- Axis Tilt: 10
- Axis Rotation: 40
- Heavy Oil Ball: Still Looking for one . . .
- Medium Oil Ball: Roto Grip Cell (original)
- Light Oil Ball: Storm Fast
- Preferred Company: Storm
- Location: North Adams, MA
Re: Vise CS Hybrid gets milky
It could be that moisture was present in some way. Humidity can affect fast curing plug. So much so, that Turbo recommends using a plastic stir stick in their quick plug instead of a wooden stick. They have found that there is enough moisture present in the wooden stir sticks to cause the plug to cloud. I have found that you can't leave the bottles sitting too long after opening. Temperature and humidity changes seem to create a shelf life once opening.
Re: Vise CS Hybrid gets milky
Thanks for the replies,
i will try plastic stirring stick.
i will try plastic stirring stick.