Drilling option for a spinner
Moderator: Moderators
-
- Member
- Posts: 104
- Joined: February 2nd, 2010, 7:36 pm
- THS Average: 224
- Positive Axis Point: 5 3/4 x 1/2 up
- Speed: 18
- Rev Rate: 400
- Axis Tilt: 12
- Axis Rotation: 45
- Heavy Oil Ball: Paradox 120 x 2 1/4 x 60
- Medium Oil Ball: IQ Tour 60 x 5 x 40
- Light Oil Ball: Joy Rid 70 x 2 1/4 x 70
- Preferred Company: Hammer / Roto / MoRich
Drilling option for a spinner
I am working with a female youth bowler who is has the following specs. Speed = 16 MPH, Axis Tilt = 37* Axis rotation = 70*. I am looking for a drilling for a bench mark ball and one drilling for heavier oil. Any help would be appreciated.
-
- Member
- Posts: 266
- Joined: January 18th, 2010, 10:48 pm
- THS Average: 200
- Heavy Oil Ball: Mania 40* x 4.25" x 30* P3.5 1000 Sia
- Medium Oil Ball: Evil Siege 45 x 4 x 35* 2000
- Light Oil Ball: Cherry Vibe 50* x 4.5" x 45* P2 4000 + FF + Extender
- Preferred Company: MoRich, Hammer, Roto, Bruns
- Location: Dobbs Ferry, NY
Re: Drilling option for a spinner
ChicoMelo wrote:I am working with a female youth bowler who is has the following specs. Speed = 16 MPH, Axis Tilt = 37* Axis rotation = 70*. I am looking for a drilling for a bench mark ball and one drilling for heavier oil. Any help would be appreciated.
Any idea of her RevRate? That would have a pretty large impact on the drilling needed. Also, any idea of her PAP?
-
- Member
- Posts: 104
- Joined: February 2nd, 2010, 7:36 pm
- THS Average: 224
- Positive Axis Point: 5 3/4 x 1/2 up
- Speed: 18
- Rev Rate: 400
- Axis Tilt: 12
- Axis Rotation: 45
- Heavy Oil Ball: Paradox 120 x 2 1/4 x 60
- Medium Oil Ball: IQ Tour 60 x 5 x 40
- Light Oil Ball: Joy Rid 70 x 2 1/4 x 70
- Preferred Company: Hammer / Roto / MoRich
Re: Drilling option for a spinner
Her rev rate is between 250-275
-
- Member
- Posts: 104
- Joined: February 2nd, 2010, 7:36 pm
- THS Average: 224
- Positive Axis Point: 5 3/4 x 1/2 up
- Speed: 18
- Rev Rate: 400
- Axis Tilt: 12
- Axis Rotation: 45
- Heavy Oil Ball: Paradox 120 x 2 1/4 x 60
- Medium Oil Ball: IQ Tour 60 x 5 x 40
- Light Oil Ball: Joy Rid 70 x 2 1/4 x 70
- Preferred Company: Hammer / Roto / MoRich
Re: Drilling option for a spinner
pap is 4 1/2 over.
- Mo Pinel
- Rest In Peace
- Posts: 10054
- Joined: January 26th, 2010, 6:10 pm
- Preferred Company: MoRich, & now RADICAL BT
- Location: Richmond, VA
Re: Drilling option for a spinner
ChicoMelo wrote:I am working with a female youth bowler who is has the following specs. Speed = 16 MPH, Axis Tilt = 37* Axis rotation = 70*. I am looking for a drilling for a bench mark ball and one drilling for heavier oil. Any help would be appreciated.
Benchmark: 35* / 4 1/4" / 40* with a P3 hole
Heavy oil: 20* / 4 1/2" / 30* with a P4 hole
Rest In Peace (1942-2021)