Ntense Lev Rg vs Ntense Lev Rg ML
Moderator: Moderators
-
- Member
- Posts: 2
- Joined: February 9th, 2010, 11:50 pm
- Preferred Company: morich
Ntense Lev Rg vs Ntense Lev Rg ML
Some discussuion please on the difference among these two balls please.
I think I just orderd the ML version, so may be asking for some driling layouts.
Thanks
I think I just orderd the ML version, so may be asking for some driling layouts.
Thanks
Re: Ntense Lev Rg vs Ntense Lev Rg ML
I'm tempted to buy an Ntense or second Repsonse...must resist!
-
- Member
- Posts: 2
- Joined: February 9th, 2010, 11:50 pm
- Preferred Company: morich
Re: Ntense Lev Rg vs Ntense Lev Rg ML
Best to get one of them now.
A very popular bowling web site has the ML version (only 14lb) and only Blems for $70.
However, the non ML in 14,15,or 16 FIRST quality is $65.
Go Figure, First Quality is cheaper that Blem - seconds, sure hope the ML is worth the more expensive Blem price.
A very popular bowling web site has the ML version (only 14lb) and only Blems for $70.
However, the non ML in 14,15,or 16 FIRST quality is $65.
Go Figure, First Quality is cheaper that Blem - seconds, sure hope the ML is worth the more expensive Blem price.
- Mo Pinel
- Rest In Peace
- Posts: 10054
- Joined: January 26th, 2010, 6:10 pm
- Preferred Company: MoRich, & now RADICAL BT
- Location: Richmond, VA
Re: Ntense Lev Rg vs Ntense Lev Rg ML
Exact same ball! ML is for Japan. Their gross weight tolerance is much tighter over there.PocketSplit wrote:Some discussuion please on the difference among these two balls please.
I think I just orderd the ML version, so may be asking for some driling layouts.
Thanks
Rest In Peace (1942-2021)
- Mo Pinel
- Rest In Peace
- Posts: 10054
- Joined: January 26th, 2010, 6:10 pm
- Preferred Company: MoRich, & now RADICAL BT
- Location: Richmond, VA
Re: Ntense Lev Rg vs Ntense Lev Rg ML
After seeing your game on video, I recommend the 'Ntense. Remind of the layout in the Response (with balance hole location) we put together and I'll nail the layout for the 'Ntense.Slap wrote:I'm tempted to buy an Ntense or second Repsonse...must resist!
Rest In Peace (1942-2021)
-
- Trusted Source
- Posts: 3432
- Joined: January 31st, 2010, 1:04 am
- Positive Axis Point: 15 15/16 x 3/16
- Speed: 13.5 (Qubica)
- Axis Tilt: 13
- Axis Rotation: 45
- Location: Hawesville KY/Tell City IN
Re: Ntense Lev Rg vs Ntense Lev Rg ML
PocketSplit -- Check your PM's. -- JohnP
Re: Ntense Lev Rg vs Ntense Lev Rg ML
I am hesitant to order an 'Ntense because I just ordered a MANIA...but I'm sure I will be convinced once you explain the different ball motions you are proposing. You nailed the Response!Mo Pinel wrote: After seeing your game on video, I recommend the 'Ntense. Remind of the layout in the Response (with balance hole location) we put together and I'll nail the layout for the 'Ntense.
The Response is 40 x 4 1/4 x 20 with no hole.
I ordered the MANIA 40 x 4 x 20.
My other medium heavy pieces
LevRG 55 x 4 x 35 with hole.
(I know, I know...but I haven't had a chance to spin my sym cores)
Solaris Requiem 45 x 4 1/2 x 30 with hole
Black Diamond 45 x 3 3/4 x 45 no hole
- Mo Pinel
- Rest In Peace
- Posts: 10054
- Joined: January 26th, 2010, 6:10 pm
- Preferred Company: MoRich, & now RADICAL BT
- Location: Richmond, VA
Re: Ntense Lev Rg vs Ntense Lev Rg ML
Slap wrote: I am hesitant to order an 'Ntense because I just ordered a MANIA...but I'm sure I will be convinced once you explain the different ball motions you are proposing. You nailed the Response!
The Response is 40 x 4 1/4 x 20 with no hole.
I ordered the MANIA 40 x 4 x 20.
Mo says:
The 'Ntense is core dominant and the mania is cover dominant. Two different motions. Core dominant balls have more midlane with earlier forward roll. Cover dominant balls have more backend with continuation. 'Ntense layout should be 50 / 3 1/4 / 20 for you.
My other medium heavy pieces:
LevRG 55 x 4 x 35 with hole.
(I know, I know...but I haven't had a chance to spin my sym cores)
Solaris Requiem 45 x 4 1/2 x 30 with hole
Black Diamond 45 x 3 3/4 x 45 no hole
Rest In Peace (1942-2021)
Re: Ntense Lev Rg vs Ntense Lev Rg ML
Thanks Mo. I will have to save that layout, BB is out of the 15. I had one in my shopping at at 8 this morning after I opened my email but I didn't pull the trigger.
However, my teammate did get one, at my recommendation. I need to gather her specs but I will solicit you for layout advice. She loves her Solid LevRG. (guess who recommended that one?)
However, my teammate did get one, at my recommendation. I need to gather her specs but I will solicit you for layout advice. She loves her Solid LevRG. (guess who recommended that one?)
-
- Trusted Source
- Posts: 3432
- Joined: January 31st, 2010, 1:04 am
- Positive Axis Point: 15 15/16 x 3/16
- Speed: 13.5 (Qubica)
- Axis Tilt: 13
- Axis Rotation: 45
- Location: Hawesville KY/Tell City IN
Re: Ntense Lev Rg vs Ntense Lev Rg ML
I did order a 16 lb 'Ntense Lev RG, but noticed they were out of the 15 lb. Thanks, PocketSplit, for the heads up on the deal. -- JohnP
- Mo Pinel
- Rest In Peace
- Posts: 10054
- Joined: January 26th, 2010, 6:10 pm
- Preferred Company: MoRich, & now RADICAL BT
- Location: Richmond, VA
Re: Ntense Lev Rg vs Ntense Lev Rg ML
If that's bowlingball.com, we just shipped them some more 15# 'Ntenses.Slap wrote:Thanks Mo. I will have to save that layout, BB is out of the 15. I had one in my shopping at at 8 this morning after I opened my email but I didn't pull the trigger.
However, my teammate did get one, at my recommendation. I need to gather her specs but I will solicit you for layout advice. She loves her Solid LevRG. (guess who recommended that one?)
Rest In Peace (1942-2021)
-
- Member
- Posts: 215
- Joined: January 28th, 2010, 10:22 am
- Positive Axis Point: 5>1^
- Speed: 15.5
- Rev Rate: 230
- Axis Tilt: 10
- Axis Rotation: 70
- Medium Oil Ball: Pink Panther
- Location: Sacramento, CA
Re: Ntense Lev Rg vs Ntense Lev Rg ML
My first Morich ball ships out Monday. I chose the N'tense, because of the 60 spin time, and Int Diff. I'll be looking for layout info soon Mo! I don't know enough of my information needed, (rev rate, speed, axis tilt/rotation) so I'm gunna try to get you a solid video to look at, and hopefully you can help me out. Will a video not be enough? Is there something I can do in the video that will help you see something/anything you need to make it of more use?
Thanks ahead of time,
Kenny
Thanks ahead of time,
Kenny
- Mo Pinel
- Rest In Peace
- Posts: 10054
- Joined: January 26th, 2010, 6:10 pm
- Preferred Company: MoRich, & now RADICAL BT
- Location: Richmond, VA
Re: Ntense Lev Rg vs Ntense Lev Rg ML
See if you can include a picture of the drilled ball, your PAP and a video of the throwing the ball down the lane taken from behind your bowling shoulder.Adrenaline wrote:My first Morich ball ships out Monday. I chose the N'tense, because of the 60 spin time, and Int Diff. I'll be looking for layout info soon Mo! I don't know enough of my information needed, (rev rate, speed, axis tilt/rotation) so I'm gunna try to get you a solid video to look at, and hopefully you can help me out. Will a video not be enough? Is there something I can do in the video that will help you see something/anything you need to make it of more use?
Thanks ahead of time,
Kenny
Rest In Peace (1942-2021)