Stucking at a bottleneck
Moderator: Moderators
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Stucking at a bottleneck
Hey this is Eric from Purdue. It's been a while since the last time I posted here.
I have bowled for almost a year now. Kinda stuck at a bottleneck. I feel like there is still something wrong mechanic-wise for me. But things only goes worse if I try to make changes.
I've recorded some shots today. By the end there was a game of 192. I start between 2nd and 3rd arrow because I dont have big hook but still want to create some angle. However, my strike percentage is still abysmal (probly 1 or 2 per game). Also I have more strikes if the ball hit the opposite pocket, its just not right.
Sorry I didn't record a better video. No one was with me so I put my phone against a bottle.
[youtube][/youtube]
Any help from anyone is appreciated!
I have bowled for almost a year now. Kinda stuck at a bottleneck. I feel like there is still something wrong mechanic-wise for me. But things only goes worse if I try to make changes.
I've recorded some shots today. By the end there was a game of 192. I start between 2nd and 3rd arrow because I dont have big hook but still want to create some angle. However, my strike percentage is still abysmal (probly 1 or 2 per game). Also I have more strikes if the ball hit the opposite pocket, its just not right.
Sorry I didn't record a better video. No one was with me so I put my phone against a bottle.
[youtube][/youtube]
Any help from anyone is appreciated!
- MegaMav
- Moderator
- Posts: 4694
- Joined: April 27th, 2007, 5:00 am
- THS Average: 225
- Sport Average: 200
- Positive Axis Point: 5.5 Over & 1 Up
- Speed: 16.0 MPH - Camera
- Rev Rate: 375
- Axis Tilt: 14
- Axis Rotation: 45
- Heavy Oil Ball: Radical - Informer
- Medium Oil Ball: Brunswick - Fearless
- Light Oil Ball: Radical - Bonus Pearl
- Preferred Company: Radical Bowling Technologies
- Location: Malta, NY
Re: Stucking at a bottleneck
Bad fit I think based on the hang up and loft. What is with the wrist brace?
See Paul Ridenour to get your fit looked at, folks at Purdue should know how to get in touch with him.
Finish with your index finger pointing right to achieve more hook downlane.
See Paul Ridenour to get your fit looked at, folks at Purdue should know how to get in touch with him.
Finish with your index finger pointing right to achieve more hook downlane.
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
index finger pointing right? isn't it gonna make it more like a back to front rolling straight ball?MegaMav wrote:Bad fit I think based on the hang up and loft. What is with the wrist brace?
See Paul Ridenour to get your fit looked at, folks at Purdue should know how to get in touch with him.
Finish with your index finger pointing right to achieve more hook downlane.
I wear the bracer because I tend to break wrist at the downswing, when I try to cock the wrist, it only makes my swing worse.
- MegaMav
- Moderator
- Posts: 4694
- Joined: April 27th, 2007, 5:00 am
- THS Average: 225
- Sport Average: 200
- Positive Axis Point: 5.5 Over & 1 Up
- Speed: 16.0 MPH - Camera
- Rev Rate: 375
- Axis Tilt: 14
- Axis Rotation: 45
- Heavy Oil Ball: Radical - Informer
- Medium Oil Ball: Brunswick - Fearless
- Light Oil Ball: Radical - Bonus Pearl
- Preferred Company: Radical Bowling Technologies
- Location: Malta, NY
Re: Stucking at a bottleneck
Ditch the brace. Dont squeeze the ball, the thumb should be tight enough where it will remain on the hand with minimal grip pressure and release naturally at the bottom of the swing.
Finish thumb up, undex finger pointed to 1 O'Clock.
Dip your shoulder more, get your head over the ball. You'll swing straighter.
Finish thumb up, undex finger pointed to 1 O'Clock.
Dip your shoulder more, get your head over the ball. You'll swing straighter.
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
Ok I will give it a try for sure.MegaMav wrote:Ditch the brace. Dont squeeze the ball, the thumb should be tight enough where it will remain on the hand with minimal grip pressure and release naturally at the bottom of the swing.
Finish thumb up, undex finger pointed to 1 O'Clock.
Dip your shoulder more, get your head over the ball. You'll swing straighter.
It justs sound more like a straight ball, especially when I break my wrist.
Re: Stucking at a bottleneck
Just IMO
I've worn and tried many different wrist braces over the years and that looks to be way too much brace for your hand.
One you need to be wearing that brace when they fit you if your going to use it, to get your fit right. If not you can start hanging in the ball etc. etc.
Plus Braces like that one, you have to concentrate more on controlling it or it controls you. They make your hand start turning the ball early and you'll be tugging the ball left a lot (Which in your video you are) especially if you have it cupped up if you don't watch out.
If you don't want to "ditch" using a brace all together, maybe just try a simpler one like just a firm wrist style. It would let you be more in control of your hand position more.
Or at the very least , take that brace and uncup it. Just have it so your wrist is straight, adjust the side to side so your hand is straight or you have just a little cock to your hand. then when your in your stance holding the ball, rotate your hand till you feel the weight of the ball drop onto your index finger try to hold that position during your swing.
And finish basically the way mega said.
I've worn and tried many different wrist braces over the years and that looks to be way too much brace for your hand.
One you need to be wearing that brace when they fit you if your going to use it, to get your fit right. If not you can start hanging in the ball etc. etc.
Plus Braces like that one, you have to concentrate more on controlling it or it controls you. They make your hand start turning the ball early and you'll be tugging the ball left a lot (Which in your video you are) especially if you have it cupped up if you don't watch out.
If you don't want to "ditch" using a brace all together, maybe just try a simpler one like just a firm wrist style. It would let you be more in control of your hand position more.
Or at the very least , take that brace and uncup it. Just have it so your wrist is straight, adjust the side to side so your hand is straight or you have just a little cock to your hand. then when your in your stance holding the ball, rotate your hand till you feel the weight of the ball drop onto your index finger try to hold that position during your swing.
And finish basically the way mega said.
"REMEMBER, it isn't how much the ball hooks, it's where."
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Stucking at a bottleneck
Are you working with a qualified coach? If not you should, your learning curve will be much faster (pun intended). 190 for bowling less than a yr is very good. Work with a coach every other week and practice the different drills to learn the modern game. Don’t practice for score. You are a beginner, why not learn the modern game, more power, more speed more strikes.
http://wiki.bowlingchat.net/wiki/index. ... ence_video" onclick="window.open(this.href);return false;
Do not progress to the next drill until you have mastered the previous.
http://wiki.bowlingchat.net/wiki/index. ... ence_video" onclick="window.open(this.href);return false;
Do not progress to the next drill until you have mastered the previous.
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
Thanks for the reply!TonyPR wrote:Are you working with a qualified coach? If not you should, your learning curve will be much faster (pun intended). 190 for bowling less than a yr is very good. Work with a coach every other week and practice the different drills to learn the modern game. Don’t practice for score. You are a beginner, why not learn the modern game, more power, more speed more strikes.
http://wiki.bowlingchat.net/wiki/index. ... ence_video" onclick="window.open(this.href);return false;
Do not progress to the next drill until you have mastered the previous.
I'm learning from the bowling class offered here in Purdue. Taught by Mr. Doug Wiedman. I don't know if he is qualified but he did write books about bowling before. This is the third time I take the class.
I'm not averaging 190 tho. I'm really varying between 120 to 160. I just can't strike reliably. Can't go anywhere with only 1 or 2 strikes per game.
I know the power, the revs has more error margin, but I'm a really skinny and physical attributes hold me back. So I feel like I'm more like mimicking Norm Duke or Liz Johnson (not power players) rather than Marshall or Chris Barnes.
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Stucking at a bottleneck
Google EJ Tacket, doesn’t get any skinnier than him.
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
-
- Member
- Posts: 49
- Joined: May 19th, 2016, 1:32 pm
- Heavy Oil Ball: Storm Supernova
- Medium Oil Ball: Rotorgrip Idol Cosmos
- Light Oil Ball: Storm Punch Out
- Preferred Company: Storm
Re: Stucking at a bottleneck
Wow, that bowling alley has sure changed a lot in 35 years. Boiler Up!
My Arsenal: Storm Supernova, Storm Absolute, Storm Phaze 3, Rotogrip Idol Cosmos, 900 Global Zen Master, and Storm Punch Out
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
I know EJ Tacket isn't as bulky as many other pros. I have no idea how he managed to lift the ball that high and get those power revs.TonyPR wrote:Google EJ Tacket, doesn’t get any skinnier than him.
I mean, EJ is one in a million isnt he?
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
WHAT?! 35 years?!skfboiler wrote:Wow, that bowling alley has sure changed a lot in 35 years. Boiler Up!
It has existed for that long?
- MegaMav
- Moderator
- Posts: 4694
- Joined: April 27th, 2007, 5:00 am
- THS Average: 225
- Sport Average: 200
- Positive Axis Point: 5.5 Over & 1 Up
- Speed: 16.0 MPH - Camera
- Rev Rate: 375
- Axis Tilt: 14
- Axis Rotation: 45
- Heavy Oil Ball: Radical - Informer
- Medium Oil Ball: Brunswick - Fearless
- Light Oil Ball: Radical - Bonus Pearl
- Preferred Company: Radical Bowling Technologies
- Location: Malta, NY
Re: Stucking at a bottleneck
No shame in that.Augustblade wrote: I know the power, the revs has more error margin, but I'm a really skinny and physical attributes hold me back. So I feel like I'm more like mimicking Norm Duke or Liz Johnson (not power players) rather than Marshall or Chris Barnes.
This is me on a challenge level oil pattern:
[youtube][/youtube]
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
You are right, I did have the bracer cupped to its maximum to achieve the "cupped wrist" position for the smooth roll and rev rate.bowl1820 wrote:Just IMO
I've worn and tried many different wrist braces over the years and that looks to be way too much brace for your hand.
One you need to be wearing that brace when they fit you if your going to use it, to get your fit right. If not you can start hanging in the ball etc. etc.
Plus Braces like that one, you have to concentrate more on controlling it or it controls you. They make your hand start turning the ball early and you'll be tugging the ball left a lot (Which in your video you are) especially if you have it cupped up if you don't watch out.
If you don't want to "ditch" using a brace all together, maybe just try a simpler one like just a firm wrist style. It would let you be more in control of your hand position more.
Or at the very least , take that brace and uncup it. Just have it so your wrist is straight, adjust the side to side so your hand is straight or you have just a little cock to your hand. then when your in your stance holding the ball, rotate your hand till you feel the weight of the ball drop onto your index finger try to hold that position during your swing.
And finish basically the way mega said.
I'll start to not use it I guess.
-
- Member
- Posts: 49
- Joined: May 19th, 2016, 1:32 pm
- Heavy Oil Ball: Storm Supernova
- Medium Oil Ball: Rotorgrip Idol Cosmos
- Light Oil Ball: Storm Punch Out
- Preferred Company: Storm
Re: Stucking at a bottleneck
Yes, if that is the same alley in the basement of the Student Union.Augustblade wrote: WHAT?! 35 years?!
It has existed for that long?
My Arsenal: Storm Supernova, Storm Absolute, Storm Phaze 3, Rotogrip Idol Cosmos, 900 Global Zen Master, and Storm Punch Out
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Stucking at a bottleneck
Now that is a smooth technique!MegaMav wrote:
No shame in that.
This is me on a challenge level oil pattern:
[youtube][/youtube]
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
-
- Member
- Posts: 23
- Joined: March 27th, 2018, 2:25 am
Re: Stucking at a bottleneck
[youtube][/youtube]MegaMav wrote:Ditch the brace. Dont squeeze the ball, the thumb should be tight enough where it will remain on the hand with minimal grip pressure and release naturally at the bottom of the swing.
Finish thumb up, undex finger pointed to 1 O'Clock.
Dip your shoulder more, get your head over the ball. You'll swing straighter.
[youtube][/youtube]
I bowled some games today without bracer and asked my friend to recorded a few shots.
It just looks not smooth at all.
- MegaMav
- Moderator
- Posts: 4694
- Joined: April 27th, 2007, 5:00 am
- THS Average: 225
- Sport Average: 200
- Positive Axis Point: 5.5 Over & 1 Up
- Speed: 16.0 MPH - Camera
- Rev Rate: 375
- Axis Tilt: 14
- Axis Rotation: 45
- Heavy Oil Ball: Radical - Informer
- Medium Oil Ball: Brunswick - Fearless
- Light Oil Ball: Radical - Bonus Pearl
- Preferred Company: Radical Bowling Technologies
- Location: Malta, NY
Re: Stucking at a bottleneck
You're either grabbing it or your fit is bad.
Seek out Paul Ridenour like I mentioned in my previous post.
Get refitted.
Ignore the comments from the peanut gallery.
Add some surface, 2000 pad on that ball and stay down at the line, hold your finish.
Roll the ball off your hand and dont help it.
Seek out Paul Ridenour like I mentioned in my previous post.
Get refitted.
Ignore the comments from the peanut gallery.
Add some surface, 2000 pad on that ball and stay down at the line, hold your finish.
Roll the ball off your hand and dont help it.
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Stucking at a bottleneck
Eric, I agree with you on checking his fit, putting more surface on the ball and working on the different aspects of his physical game you mentioned. As I recommend above, the Kegel drills are great for this and working with a qualified coach will shorten his learning curve a lot. Doesn’t have to become a power player, ok you made your point with your video but doing drills and working with a coach in my opinion is the way to go. Peanut man over and out.
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Stucking at a bottleneck
It’s all in the technique, not much strength required... although I agree he is a freak, just wanted to show you being skinny isn’t an obstacle.Augustblade wrote: I know EJ Tacket isn't as bulky as many other pros. I have no idea how he managed to lift the ball that high and get those power revs.
I mean, EJ is one in a million isnt he?
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent