Casting/copying thumb grip
Moderator: Moderators
-
- Member
- Posts: 71
- Joined: March 1st, 2019, 6:05 pm
- Positive Axis Point: 6 x 1
- Speed: 17 foul line
- Rev Rate: 440
- Axis Tilt: 17
- Axis Rotation: 70
Casting/copying thumb grip
So, I finally got a thumb grip fit correctly. I've looked at a couple youtube videos for casting that one, but didn't really see anything about what to do after that. The shop I got the fitting done at is a bit of a drive so going there to get another switch grip made wouldn't really be all that convenient and of course the process of fine tuning to get a new one to match the current one would be time consuming with no real guarantee that it'll match exactly. Is this even something worth looking into? Is it something that I could just get done if I send out the current switch grip to get a couple of replacements made based on what I currently have?
Right handed
Rev Rate 420s
Ball speed at release 17
Axis point 6 3/16" and 1" up
Tilt 17 degrees
Rotation 70 degrees
Rev Rate 420s
Ball speed at release 17
Axis point 6 3/16" and 1" up
Tilt 17 degrees
Rotation 70 degrees
-
- Member
- Posts: 46
- Joined: November 2nd, 2018, 4:08 am
- Preferred Company: Innovative
Re: Casting/copying thumb grip
You can get a kit, such as Vise’s Exactacation Kit, to cast and mold your favorite tumb hole.
-
- Trusted Source
- Posts: 3432
- Joined: January 31st, 2010, 1:04 am
- Positive Axis Point: 15 15/16 x 3/16
- Speed: 13.5 (Qubica)
- Axis Tilt: 13
- Axis Rotation: 45
- Location: Hawesville KY/Tell City IN
Re: Casting/copying thumb grip
Contact buddiesproshop.com (link below) and talk to them, I think they'll work something out with you. -- JohnPnwohbowler wrote:So, I finally got a thumb grip fit correctly. I've looked at a couple youtube videos for casting that one, but didn't really see anything about what to do after that. The shop I got the fitting done at is a bit of a drive so going there to get another switch grip made wouldn't really be all that convenient and of course the process of fine tuning to get a new one to match the current one would be time consuming with no real guarantee that it'll match exactly. Is this even something worth looking into? Is it something that I could just get done if I send out the current switch grip to get a couple of replacements made based on what I currently have?
https://www.buddiesproshop.com/" onclick="window.open(this.href);return false;
- imagonman
- Member
- Posts: 126
- Joined: January 21st, 2017, 5:18 pm
- Preferred Company: Brunswick
- Location: Cleveland Ohio
Re: Casting/copying thumb grip
You might wanna look into ProEdge Custom Thumb. Norm Duke {MR. fidget w/ the thumb constantly} just did & went back to back'ers @ 55 & in the money a lot lately. Worth a look, contact Tom Laskow below:
https://www.proedgebowling.com/store1/-p88522610" onclick="window.open(this.href);return false;
I had 10 different thumbholes in 10 balls. All supposedly drilled identical, but were NOT. Took my favorite one, made the master mold from that one & made a dozen thumb slugs for me. The wife also had thumb issues from 5 different balls. Made hers & put in all & what do you know, we both love them. Norm Duke just went to them as well bcuz of 'issues' he was having, gave a plug in interview after his latest title win in Jonesboro. You can do all this yourself @ home. Super easy to mold, cast the thumb slug & install. Give it a look!
[youtube][/youtube]
https://www.proedgebowling.com/store1/-p88522610" onclick="window.open(this.href);return false;
I had 10 different thumbholes in 10 balls. All supposedly drilled identical, but were NOT. Took my favorite one, made the master mold from that one & made a dozen thumb slugs for me. The wife also had thumb issues from 5 different balls. Made hers & put in all & what do you know, we both love them. Norm Duke just went to them as well bcuz of 'issues' he was having, gave a plug in interview after his latest title win in Jonesboro. You can do all this yourself @ home. Super easy to mold, cast the thumb slug & install. Give it a look!
[youtube][/youtube]
Last edited by imagonman on March 19th, 2019, 4:29 am, edited 1 time in total.
-
- Member
- Posts: 71
- Joined: March 1st, 2019, 6:05 pm
- Positive Axis Point: 6 x 1
- Speed: 17 foul line
- Rev Rate: 440
- Axis Tilt: 17
- Axis Rotation: 70
Re: Casting/copying thumb grip
This is exactly what I was looking for. Not even a bad price if I just pickup the sample kit to make the one mold I need then pick up more plug material later when I need it. Much appreciated.imagonman wrote:You might wanna look into ProEdge Custom Thumb. Norm Duke {MR. fidget w/ the thumb constantly} just did & went back to back'ers @ 55 & in the money a lot lately. Worth a look, contact Tom Laskow below:
https://www.proedgebowling.com/store1/C" onclick="window.open(this.href);return false; ... -p88522610
I had 10 different thumbholes in 10 balls. All supposedly drilled identical, but were NOT. Took my favorite one, made the master mold from that one & made a dozen thumb slugs for me. The wife also had thumb issues from 5 different balls. Made hers & put in all & what do you know, we both love them. Norm Duke just went to them as well bcuz of 'issues' he was having, gave a plug in interview after his latest title win in Jonesboro. You can do all this yourself @ home. Super easy to mold, cast the thumb slug & install. Give it a look!
[youtube][/youtube]
Right handed
Rev Rate 420s
Ball speed at release 17
Axis point 6 3/16" and 1" up
Tilt 17 degrees
Rotation 70 degrees
Rev Rate 420s
Ball speed at release 17
Axis point 6 3/16" and 1" up
Tilt 17 degrees
Rotation 70 degrees
- deanchamp
- Trusted Source
- Posts: 455
- Joined: August 4th, 2010, 10:23 am
- THS Average: 220
- Location: Melbourne, Australia
Re: Casting/copying thumb grip
This is the link:
https://www.proedgebowling.com/ProEdge-Custom-Thumb" onclick="window.open(this.href);return false;
https://www.proedgebowling.com/ProEdge-Custom-Thumb" onclick="window.open(this.href);return false;
USBC Silver Level Coach
BCU Graduate - Mastery of Layouts
BTM contributor
BCU Graduate - Mastery of Layouts
BTM contributor
-
- Member
- Posts: 46
- Joined: November 2nd, 2018, 4:08 am
- Preferred Company: Innovative
Re: Casting/copying thumb grip
Tom has such a good company. I’ve changed over to his product. I love the fact that you can stock the silicone casting cartridges with no fear of spoilage. Also, the no muss - no fuss mixing is great. Anyone who hand-writes a thank-you not on the receipt is going to support you. New Loyal customer here