Board index » General Forums » The Pro Shop




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: looking for some help with a new bowler fitting!
 Posted: Fri Apr 06, 2018 6:01 pm Post Number: #1 Post
Offline
Member

Joined: February 2, 2018
Posts: 8
Reputation: 0
Reputation Power: 1
I had an open bowler come into the shop who insisted on getting a performance ball. The bowler at the time was using a house ball and gripping the ball with a half thumb. After reading online and people telling him to go full thumb he wanted to get fitted for a ball. After suggesting a Rhino at most as this was his first ball, he insisted on something else, which was a roto grip wreck'em. Using the BT fitting wheel and a jayhawk fitting ball, I got him fitted for a fingertip grip.

When he picked up the ball I watched him throw the ball for a bit and he then started complaining about his wrist hurting, which seemed to be from trying to throw the ball like he was before, trying to crank it and twisting his wrist at release but now with his thumb in the ball.

After giving him some tips on proper release for a finger tip, keeping his hand behind the ball and having his thumb point to the sky at release, he started getting better rotation on the ball, and the ball wasn't hooking off the lane. But now he is complaining of discomfort on the back of his hand. He says he has no discomfort elsewhere and the grip does not feel stretched to him.

I have learned my lesson, don't sell a performance ball as a first ball, regardless if the customer insists.
I told him I would redrill the ball for a half thumb grip if he wants, but he then says no, and wants to keep trying full thumb.

Any tips on how others deal with customers who insist on getting a performance ball, over a plastic or entry level ball would be greatly appreciated. Especially these younger generation bowlers who are using two hands or no thumb etc. with a house ball, and then want to jump into a performance ball?


Top 
 Profile  
Reply with quote  
 Post subject: Re: looking for some help with a new bowler fitting!
 Posted: Fri Apr 06, 2018 7:27 pm Post Number: #2 Post
Offline
Senior Member
User avatar

Joined: July 9, 2012
Posts: 1304
Location: Central Florida
Reputation: 445
Reputation Power: 5
Just a opinion, but He's changed to a totally different grip than what he was using before and how he's releasing it.

Whether he bought a entry level ball or a performance ball. He most likely would have had the same issues, which all appear to be fit and release related.

_________________
Click my green + rep button if this helps!
"REMEMBER, it isn't how much the ball hooks, it's where."


Top 
 Profile  
Reply with quote  
 Post subject: Re: looking for some help with a new bowler fitting!
 Posted: Sat Apr 07, 2018 3:56 pm Post Number: #3 Post
Offline
Member

Joined: February 2, 2018
Posts: 8
Reputation: 0
Reputation Power: 1
bowl1820 wrote:
Just a opinion, but He's changed to a totally different grip than what he was using before and how he's releasing it.

Whether he bought a entry level ball or a performance ball. He most likely would have had the same issues, which all appear to be fit and release related.


Yes, a good point, regardless of the ball he would be having the issues he is having. My concern now is that if he wants to go back to his half thumb style grip he was using before with the new ball, that it will be way too aggressive with his revs.

I guess my question should be, how do others suggest to a bowler who is buying their first custom fitted ball, to stick with a polyester ball or entry level ball over that high end ball they see the pros throwing on tv?


Top 
 Profile  
Reply with quote  
 Post subject: Re: looking for some help with a new bowler fitting!
 Posted: Sat Apr 07, 2018 4:37 pm Post Number: #4 Post
Offline
Trusted Source

Joined: January 30, 2010
Posts: 3360
Location: Hawesville KY/Tell City IN
Reputation: 276
Reputation Power: 3
Unless you can convince the customer to change his mind you only have two choices, either sell him the ball he wants or send him to another driller. I would sell him the ball he wants with the reminder that I don't recommend it. As far as changing his mind, some will listen and some won't. All you can do is try. -- JohnP


Top 
 Profile  
Reply with quote  
 Post subject: Re: looking for some help with a new bowler fitting!
 Posted: Sat Aug 04, 2018 2:02 am Post Number: #5 Post
Offline
Member

Joined: January 29, 2010
Posts: 384
Location: cape girardeau , mo
Reputation: 2
Reputation Power: 1
JohnP wrote:
Unless you can convince the customer to change his mind you only have two choices, either sell him the ball he wants or send him to another driller. I would sell him the ball he wants with the reminder that I don't recommend it. As far as changing his mind, some will listen and some won't. All you can do is try. -- JohnP



I learned a long time ago (in the 60's ) that the customer is always right even if they are wrong...Do your best to get them to see the light, but in the end do as they wish, but be clear about the end results...I am in agreement with John .....Steve S


Top 
 Profile  
Reply with quote  
 Post subject: Re: looking for some help with a new bowler fitting!
 Posted: Sat Aug 04, 2018 10:23 am Post Number: #6 Post
Offline
Member

Joined: April 4, 2015
Posts: 260
Location: Iceland
Reputation: 18
Reputation Power: 1
I think there is a huge problem with selling somebody who wants hook a polyester or even the lowest of the entry level balls. People want tonsee hook and they will do what it takes to hook the ball. Having them throw polyester or the lowest entry level balls will make them hook the ball the wrong way and bad tendencies will start to form.

Better to hook to much and learn to control it in my opinion. you'll notice right away if 20-30 extra bucks is that big of a deal for them


Top 
 Profile  
Reply with quote  
 Post subject: Re: looking for some help with a new bowler fitting!
 Posted: Sat Aug 04, 2018 3:54 pm Post Number: #7 Post
Offline
Pro Shop

Joined: August 28, 2012
Posts: 319
Location: Dublin, Ireland
Reputation: 63
Reputation Power: 1
steve s wrote:
I learned a long time ago (in the 60's ) that the customer is always right even if they are wrong...Do your best to get them to see the light, but in the end do as they wish, but be clear about the end results. Steve S

Just remember the customer may not always be right -- but is always the customer. We all get customers lke that. Good luck.


Top 
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 7 posts ] 

Board index » General Forums » The Pro Shop


 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: