1500 grit polished
Moderator: Moderators
-
- Member
- Posts: 21
- Joined: November 9th, 2010, 8:00 pm
- Preferred Company: 2kigc
1500 grit polished
I just got a Crossroad, Fire Road and a IQ Tour.. Having difficulties on deciding what surfaces to use on the Crossroad and Fire Road.. With both balls being 1500 grit polished OOB, I know its hard to re-create that surface by hand but does anybody know how to come somewhat close.. Would 2000 abralon with a light polish be similar??
Re: 1500 grit polished
Strom recommends for 1500 Polished
1)500-grit Abralon 30 sec. 4 sides firm pressure
2)1000-grit Abralon 20 sec. 4 sides light pressure
3)2000-grit Abralon 20 sec. 4 sides light pressure
4)4000-grit Abralon 20 sec. 4 sides light pressure
5)Strom step 2-polish lightly 15 seconds each side
This is on this site somewhere. Maybe in the wiki.
1)500-grit Abralon 30 sec. 4 sides firm pressure
2)1000-grit Abralon 20 sec. 4 sides light pressure
3)2000-grit Abralon 20 sec. 4 sides light pressure
4)4000-grit Abralon 20 sec. 4 sides light pressure
5)Strom step 2-polish lightly 15 seconds each side
This is on this site somewhere. Maybe in the wiki.
* MPH @ aarows
* RPM
AR *
AT *
PAP 3 3/4"
(* rebuilding)
“The good thing about science is that it's true whether or not you believe in it.”
― Neil deGrasse Tyson
* RPM
AR *
AT *
PAP 3 3/4"
(* rebuilding)
“The good thing about science is that it's true whether or not you believe in it.”
― Neil deGrasse Tyson
Re: 1500 grit polished
Using a Spinner
Old Storm Method:
1500-grit Polished Factory Finish
1. 500-grit Abralon® pad – Sand for 15 seconds on all four sides.
2. Grey Scotch-Brite™ pad – Sand for 40 seconds on all four sides.
3. Storm® Step Two™ – Polish lightly for 15 seconds on two sides.
New Storm Method:
1500-grit Polished Factory Finish
1. 500-grit Abralon® – Sand firmly for 30 seconds on all four sides.
2. 1000-grit Abralon – Sand lightly for 20 seconds on all four sides.
3. 2000-grit Abralon – Sand lightly for 20 seconds on all four sides.
4. 4000-grit Abralon – Sand lightly for 20 seconds on all four sides.
5. Storm® Step Two™ – Polish lightly for 15 seconds on each side.
Old Storm Method:
1500-grit Polished Factory Finish
1. 500-grit Abralon® pad – Sand for 15 seconds on all four sides.
2. Grey Scotch-Brite™ pad – Sand for 40 seconds on all four sides.
3. Storm® Step Two™ – Polish lightly for 15 seconds on two sides.
New Storm Method:
1500-grit Polished Factory Finish
1. 500-grit Abralon® – Sand firmly for 30 seconds on all four sides.
2. 1000-grit Abralon – Sand lightly for 20 seconds on all four sides.
3. 2000-grit Abralon – Sand lightly for 20 seconds on all four sides.
4. 4000-grit Abralon – Sand lightly for 20 seconds on all four sides.
5. Storm® Step Two™ – Polish lightly for 15 seconds on each side.
"REMEMBER, it isn't how much the ball hooks, it's where."