Mo ball for me?

Bowling ball related topics including new products, arsenals and comparisons.

Moderator: Moderators

Post Reply
User avatar
fufu
Member
Member
Posts: 451
Joined: January 29th, 2010, 10:39 pm
THS Average: 230
Positive Axis Point: 5 right, 3/8 up
Speed: 16
Rev Rate: 320
Axis Tilt: 17
Axis Rotation: 55

Mo ball for me?

Post by fufu » February 7th, 2010, 4:47 pm

Found some "older" NIB Morich stuff for sale:
Solid LevRG 15lbs 2ozs, 3-4” Pin, 2.4ozs Top
Ntense LevRG 15lbs 2ozs, 2-3” Pin, 3.0ozs Top
NSane Levrg 15/5, 3.00 tw, 3-1/2" pin, cg 1/2" right

Mo you have my specs and my arsenal. Pick one for me!
http://www.rotogrip.com" onclick="window.open(this.href);return false;
https://www.facebook.com/Round-Holes-No ... 602077080/" onclick="window.open(this.href);return false;

User avatar
Mo Pinel
Trusted Source
Trusted Source
Posts: 10054
Joined: January 26th, 2010, 6:10 pm
Preferred Company: MoRich, & now RADICAL BT

Re: Mo ball for me?

Post by Mo Pinel » February 7th, 2010, 8:22 pm

fufu wrote:Found some "older" NIB Morich stuff for sale:
Solid LevRG 15lbs 2ozs, 3-4” Pin, 2.4ozs Top
Ntense LevRG 15lbs 2ozs, 2-3” Pin, 3.0ozs Top
NSane Levrg 15/5, 3.00 tw, 3-1/2" pin, cg 1/2" right

Mo you have my specs and my arsenal. Pick one for me!
What thread? I'll be glad to. Those are three completely different motions. One will be perfect. Where are specs.? I found your arsenal.

User avatar
fufu
Member
Member
Posts: 451
Joined: January 29th, 2010, 10:39 pm
THS Average: 230
Positive Axis Point: 5 right, 3/8 up
Speed: 16
Rev Rate: 320
Axis Tilt: 17
Axis Rotation: 55

Re: Mo ball for me?

Post by fufu » February 7th, 2010, 9:03 pm

viewtopic.php?f=13&t=162

Ball speed: 17-17.5 at the quibica or around 19-20 in the heads
Rev rate: 325
Tilt: 13
Axis Rotation: 40
http://www.rotogrip.com" onclick="window.open(this.href);return false;
https://www.facebook.com/Round-Holes-No ... 602077080/" onclick="window.open(this.href);return false;

User avatar
Mo Pinel
Trusted Source
Trusted Source
Posts: 10054
Joined: January 26th, 2010, 6:10 pm
Preferred Company: MoRich, & now RADICAL BT

Re: Mo ball for me?

Post by Mo Pinel » February 8th, 2010, 1:13 pm

fufu wrote:viewtopic.php?f=13&t=162

Ball speed: 17-17.5 at the quibica or around 19-20 in the heads
Rev rate: 325
Tilt: 13
Axis Rotation: 40
The 'Nsane is definitely for you, and the Solid will work for THS overblocks.

Drill the 'Nsane 55* / 4" / 40* with a P 2.5 hole (you may have to drill the fingers a little deep).
Drill the Solid 60* / 3" / 30* with a P2 hole, if necessary.

Let me know how it goes.

User avatar
fufu
Member
Member
Posts: 451
Joined: January 29th, 2010, 10:39 pm
THS Average: 230
Positive Axis Point: 5 right, 3/8 up
Speed: 16
Rev Rate: 320
Axis Tilt: 17
Axis Rotation: 55

Re: Mo ball for me?

Post by fufu » February 8th, 2010, 3:49 pm

Got the insane, be here next week.
http://www.rotogrip.com" onclick="window.open(this.href);return false;
https://www.facebook.com/Round-Holes-No ... 602077080/" onclick="window.open(this.href);return false;

User avatar
fufu
Member
Member
Posts: 451
Joined: January 29th, 2010, 10:39 pm
THS Average: 230
Positive Axis Point: 5 right, 3/8 up
Speed: 16
Rev Rate: 320
Axis Tilt: 17
Axis Rotation: 55

Re: Mo ball for me?

Post by fufu » February 18th, 2010, 4:48 am

Drilled, needs a balance hole. Statics before drilling:

1 1/2 oz thumb
2oz side

I'm going to try and throw it tomorrow.
http://www.rotogrip.com" onclick="window.open(this.href);return false;
https://www.facebook.com/Round-Holes-No ... 602077080/" onclick="window.open(this.href);return false;

User avatar
Mo Pinel
Trusted Source
Trusted Source
Posts: 10054
Joined: January 26th, 2010, 6:10 pm
Preferred Company: MoRich, & now RADICAL BT

Re: Mo ball for me?

Post by Mo Pinel » February 18th, 2010, 4:21 pm

fufu wrote:Drilled, needs a balance hole. Statics before drilling:

1 1/2 oz thumb
2oz side

I'm going to try and throw it tomorrow.
Use the P3 hole. Start with 15/16", 2 3/4" deep. If the statics are not yet legal, increase the size of the hole as necessary. If you want the ball to read the pattern stronger enlarge even more. Let me know how it works.

User avatar
fufu
Member
Member
Posts: 451
Joined: January 29th, 2010, 10:39 pm
THS Average: 230
Positive Axis Point: 5 right, 3/8 up
Speed: 16
Rev Rate: 320
Axis Tilt: 17
Axis Rotation: 55

Re: Mo ball for me?

Post by fufu » February 19th, 2010, 5:37 am

P3 hole, 1" bit, 3" deep.

Ball barely wiggled on our fresh house pattern. I chased it right but never found much I liked. Took the ball back to the shop and hit it with 1000 grit paper. This allowed the ball to actually read the pattern, hook and roll. Carry was so-so, if I bellied the ball at all, it was weak 10.

I tried adding some tilt and axis rotation with some success. I didn't expect this to be a "first ball out of the bag" type, but dang....it didn't hook much at all. I think I'm gonna try 400 plus polish.
http://www.rotogrip.com" onclick="window.open(this.href);return false;
https://www.facebook.com/Round-Holes-No ... 602077080/" onclick="window.open(this.href);return false;

User avatar
Mo Pinel
Trusted Source
Trusted Source
Posts: 10054
Joined: January 26th, 2010, 6:10 pm
Preferred Company: MoRich, & now RADICAL BT

Re: Mo ball for me?

Post by Mo Pinel » February 19th, 2010, 7:53 am

fufu wrote:P3 hole, 1" bit, 3" deep.

Ball barely wiggled on our fresh house pattern. I chased it right but never found much I liked. Took the ball back to the shop and hit it with 1000 grit paper. This allowed the ball to actually read the pattern, hook and roll. Carry was so-so, if I bellied the ball at all, it was weak 10.

I tried adding some tilt and axis rotation with some success. I didn't expect this to be a "first ball out of the bag" type, but dang....it didn't hook much at all. I think I'm gonna try 400 plus polish.
Is there room to make the hole bigger? What are your statics now? Sounds to be like a bigger balance hole will help lots if it can be enlarged more.

User avatar
RevZiLLa
Pro Shop
Pro Shop
Posts: 260
Joined: January 26th, 2010, 8:11 pm
Location: Richmond, VA

Re: Mo ball for me?

Post by RevZiLLa » February 22nd, 2010, 1:35 am

Have you made that balance hole bigger diameter yet? You may want to drill the thumb deeper too.
=======================================================
RevZ

elgavachon
Trusted Source
Trusted Source
Posts: 3167
Joined: January 18th, 2010, 9:21 pm

Re: Mo ball for me?

Post by elgavachon » February 22nd, 2010, 2:25 am

I don't understand why eveyonce in a while this happens. I had a levrge that I eventually gave to my kid because I couldn't get a wrinkle out of it. He was able to cover the whole lane with it. I had an insane and I was able to hook it as much as I wanted. I chalked it up to unexplainable.

User avatar
fufu
Member
Member
Posts: 451
Joined: January 29th, 2010, 10:39 pm
THS Average: 230
Positive Axis Point: 5 right, 3/8 up
Speed: 16
Rev Rate: 320
Axis Tilt: 17
Axis Rotation: 55

Re: Mo ball for me?

Post by fufu » February 22nd, 2010, 3:48 am

I've changed the surface 3x so far. I enlarged the balance hole and it still isn't all that great for me. I should have taken it today. There was a very oily house pattern, with a big time dry spot outside of 5. I think it might have done well there.
http://www.rotogrip.com" onclick="window.open(this.href);return false;
https://www.facebook.com/Round-Holes-No ... 602077080/" onclick="window.open(this.href);return false;

Post Reply