BowlingChat.net
http://forum.bowlingchat.net/

Burgandy Hammer
http://forum.bowlingchat.net/viewtopic.php?f=6&t=13833
Page 1 of 1

Author:  lpc300 [ Mon Jun 11, 2018 10:34 am ]
Post subject:  Burgandy Hammer

Hi all. A friend of mine gave me a Burgandy Hammer to drill for him. I am having trouble with the layout... not because of how he bowls or what he wants, but because there seems like no typical markings on the ball. No pin, no noticeable MG. Only the Hammer label. Am I missing something? And if not, how do I lay the ball out using the dual angle method?

Author:  lpc300 [ Mon Jun 11, 2018 10:46 am ]
Post subject:  Re: Burgandy Hammer

Oh, and one more piece of information. This is a redrill. Ball was plugged once. I am wondering if the pin might be in the ring finger.

Author:  Arkansas [ Tue Jun 12, 2018 7:05 pm ]
Post subject:  Re: Burgandy Hammer

There should be a reddish-orange pin. If you don't see it, it's in one of the fingers. The CG is the Burgundy logo. I think the center of the circle is it.

Author:  MeNoRevs [ Tue Jun 12, 2018 10:09 pm ]
Post subject:  Re: Burgandy Hammer

You should be able to look thru the insert if you see the stem of the pin. The pin is the same color as the ball.

Author:  EricHartwell [ Tue Jun 12, 2018 10:45 pm ]
Post subject:  Re: Burgandy Hammer

lpc300 wrote:
Oh, and one more piece of information. This is a redrill. Ball was plugged once. I am wondering if the pin might be in the ring finger.

Is it an Original Faball Burgundy or the new Reacta-Thane Burgundy?

Try sanding the ball dull. The pin will reveal itself unless of course it is in the plugged finger hole. At least it will help confirm your suspicions.

Author:  lpc300 [ Mon Jun 18, 2018 3:12 am ]
Post subject:  Re: Burgandy Hammer

Thanks all. Turned out it was in the ring finger.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/