After a three game set of league bowling ( 41' typical house shot if that matters), what do you do to clean/touch up a pearl or polished ball vs a sanded/solid ball. While still at the lanes before going home. Example Proton Physix vs Astrphysix or even a UC2.
Different cleaners used?
Thanks
Yak
Ball cleaning after league pearl vs sanded
Moderator: Moderators
-
- Member
- Posts: 70
- Joined: March 3rd, 2013, 1:56 pm
- THS Average: 210
- Sport Average: 200
- Positive Axis Point: 4 5/8' ---> by 1/4" ^
- Speed: 16 .3 mph off my hand
- Rev Rate: 300
- Axis Tilt: 7
- Axis Rotation: 55
- Heavy Oil Ball: 900 Global Reality
- Medium Oil Ball: 900 Global Zen
- Light Oil Ball: Roto Grip Hustle PBR
- Preferred Company: SPI Brands
- Contact:
Re: Ball cleaning after league pearl vs sanded
I use the storm reacta foam after every league or practice session on both types of balls. Then after every 9-10 games i use an abralon pad on my sanded balls that’s the same grit that I have on the ball currently, and on a polished ball I use the storm reacta shine after 9-10 games. After 25 games with a polished ball I scuff the surface with a 4000 grit abralon pad, and then use the reacta shine polish, as most storm balls that are polished are actually finished with 4000 when polished is applied. After 60-75 games I have the balls detoxed and resurfaced. Hope this helps.
4 5/8” —> x 1/4” ^ PAP
10* rotation
7* tilt
300 rpm’s
17 mph off my hand
10* rotation
7* tilt
300 rpm’s
17 mph off my hand