Ball cleaning after league pearl vs sanded

You can post any bowling related topics here.

Moderator: Moderators

Post Reply
Ezeeduzit
Member
Member
Posts: 9
Joined: March 11th, 2019, 5:10 am
Preferred Company: Dale Yakaites Photography

Ball cleaning after league pearl vs sanded

Post by Ezeeduzit » October 10th, 2021, 12:14 am

After a three game set of league bowling ( 41' typical house shot if that matters), what do you do to clean/touch up a pearl or polished ball vs a sanded/solid ball. While still at the lanes before going home. Example Proton Physix vs Astrphysix or even a UC2.
Different cleaners used?
Thanks
Yak

Walkerman10000
Member
Member
Posts: 53
Joined: March 3rd, 2013, 1:56 pm
THS Average: 195
Sport Average: 190
Positive Axis Point: 4 5/8' ---> by 1/4" ^
Speed: 15 mph off my hand
Rev Rate: 330
Axis Tilt: 15
Axis Rotation: 55
Heavy Oil Ball: storm virtual gravity nano
Medium Oil Ball: storm crossroad
Light Oil Ball: 900 global link s30
Preferred Company: Storm and Brunswick
Contact:

Re: Ball cleaning after league pearl vs sanded

Post by Walkerman10000 » October 10th, 2021, 10:07 pm

I use the storm reacta foam after every league or practice session on both types of balls. Then after every 9-10 games i use an abralon pad on my sanded balls that’s the same grit that I have on the ball currently, and on a polished ball I use the storm reacta shine after 9-10 games. After 25 games with a polished ball I scuff the surface with a 4000 grit abralon pad, and then use the reacta shine polish, as most storm balls that are polished are actually finished with 4000 when polished is applied. After 60-75 games I have the balls detoxed and resurfaced. Hope this helps.
4 5/8” —> x 1/4” ^ PAP
55* rotation
15* tilt
330 rpm’s
15 mph off my hand

Post Reply