Drilling option for a spinner

Which layout is right for me?

Moderator: Moderators

Post Reply
ChicoMelo
Member
Member
Posts: 104
Joined: February 2nd, 2010, 7:36 pm
THS Average: 224
Positive Axis Point: 5 3/4 x 1/2 up
Speed: 18
Rev Rate: 400
Axis Tilt: 12
Axis Rotation: 45
Heavy Oil Ball: Paradox 120 x 2 1/4 x 60
Medium Oil Ball: IQ Tour 60 x 5 x 40
Light Oil Ball: Joy Rid 70 x 2 1/4 x 70
Preferred Company: Hammer / Roto / MoRich

Drilling option for a spinner

Post by ChicoMelo » February 15th, 2010, 2:41 am

I am working with a female youth bowler who is has the following specs. Speed = 16 MPH, Axis Tilt = 37* Axis rotation = 70*. I am looking for a drilling for a bench mark ball and one drilling for heavier oil. Any help would be appreciated.

MattCosta7
Member
Member
Posts: 266
Joined: January 18th, 2010, 10:48 pm
THS Average: 200
Heavy Oil Ball: Mania 40* x 4.25" x 30* P3.5 1000 Sia
Medium Oil Ball: Evil Siege 45 x 4 x 35* 2000
Light Oil Ball: Cherry Vibe 50* x 4.5" x 45* P2 4000 + FF + Extender
Preferred Company: MoRich, Hammer, Roto, Bruns
Location: Dobbs Ferry, NY
Contact:

Re: Drilling option for a spinner

Post by MattCosta7 » February 15th, 2010, 3:10 am

ChicoMelo wrote:I am working with a female youth bowler who is has the following specs. Speed = 16 MPH, Axis Tilt = 37* Axis rotation = 70*. I am looking for a drilling for a bench mark ball and one drilling for heavier oil. Any help would be appreciated.

Any idea of her RevRate? That would have a pretty large impact on the drilling needed. Also, any idea of her PAP?

ChicoMelo
Member
Member
Posts: 104
Joined: February 2nd, 2010, 7:36 pm
THS Average: 224
Positive Axis Point: 5 3/4 x 1/2 up
Speed: 18
Rev Rate: 400
Axis Tilt: 12
Axis Rotation: 45
Heavy Oil Ball: Paradox 120 x 2 1/4 x 60
Medium Oil Ball: IQ Tour 60 x 5 x 40
Light Oil Ball: Joy Rid 70 x 2 1/4 x 70
Preferred Company: Hammer / Roto / MoRich

Re: Drilling option for a spinner

Post by ChicoMelo » February 15th, 2010, 3:12 am

Her rev rate is between 250-275

ChicoMelo
Member
Member
Posts: 104
Joined: February 2nd, 2010, 7:36 pm
THS Average: 224
Positive Axis Point: 5 3/4 x 1/2 up
Speed: 18
Rev Rate: 400
Axis Tilt: 12
Axis Rotation: 45
Heavy Oil Ball: Paradox 120 x 2 1/4 x 60
Medium Oil Ball: IQ Tour 60 x 5 x 40
Light Oil Ball: Joy Rid 70 x 2 1/4 x 70
Preferred Company: Hammer / Roto / MoRich

Re: Drilling option for a spinner

Post by ChicoMelo » February 15th, 2010, 3:15 am

pap is 4 1/2 over.

User avatar
Mo Pinel
Trusted Source
Trusted Source
Posts: 10054
Joined: January 26th, 2010, 6:10 pm
Preferred Company: MoRich, & now RADICAL BT

Re: Drilling option for a spinner

Post by Mo Pinel » February 15th, 2010, 12:14 pm

ChicoMelo wrote:I am working with a female youth bowler who is has the following specs. Speed = 16 MPH, Axis Tilt = 37* Axis rotation = 70*. I am looking for a drilling for a bench mark ball and one drilling for heavier oil. Any help would be appreciated.

Benchmark: 35* / 4 1/4" / 40* with a P3 hole
Heavy oil: 20* / 4 1/2" / 30* with a P4 hole

Post Reply