Hi I just got this ball and Im ready to put some holes on it, I used Vsl storm system to lay out this ball and it show to drill 22 x 4 1/2 × 39 dual angle layout
My pap 4.5 over 1/2 up
Speed 15 mhp
Tilt =average
Off the side
Im looking for long and some rasonable back end
What do you guys think ??
Hammer purple urethane
Moderator: Moderators
-
- Member
- Posts: 41
- Joined: March 22nd, 2016, 7:50 am
- Preferred Company: storm
Hammer purple urethane
Last edited by poloidrogo on April 12th, 2019, 9:51 am, edited 1 time in total.
Re: Hammer purple urethane
It would be helpful if you can give some more information about your release specs.
Speed, Tilt, Rotation, Revs and perhaps even the type of pattern you play mostly.
Based on those numbers it's possible to give a more accurate layout
Speed, Tilt, Rotation, Revs and perhaps even the type of pattern you play mostly.
Based on those numbers it's possible to give a more accurate layout
-
- Member
- Posts: 41
- Joined: March 22nd, 2016, 7:50 am
- Preferred Company: storm
Re: Hammer purple urethane
My rev 425
Speed 15 mph
Axis tilt 10
Axis rotation 45
Im bowling in a house shoot
Thanks in advance
Speed 15 mph
Axis tilt 10
Axis rotation 45
Im bowling in a house shoot
Thanks in advance
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Hammer purple urethane
My stats are similar to yours and I like my urethanes with VAL angles from 55-65, angles in that range are smooth for me. Drilling angle will be to your thumb hole so put the cg wherever you think looks good. Pin to PAP from 4-5”, 4 will give you some flare and 5 almost no flare as the core is a weak core.
X x 5 x 60 is good for your Purple, it’s a great ball
X x 5 x 60 is good for your Purple, it’s a great ball
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Re: Hammer purple urethane
I would have proposed 80 x 3.5" x 50. But don't pin yourself to my suggestion. I'm just starting digging deeper into drilling and layouts.
Is my suggestion wrong or can this work too?TonyPR wrote: X x 5 x 60 is good for your Purple, it’s a great ball
-
- Trusted Source
- Posts: 1386
- Joined: December 14th, 2014, 3:08 am
- Preferred Company: Radical
- Location: San Juan, PR
Re: Hammer purple urethane
From 50 to 60 there’s not really much difference, they’re both smooth rolling longer transition VALs. a 3.5” Pin to PAP will have more flare than my 5” suggestion. One of the cool things about urethane that many do not like is that you will carry down oil to the breakpoint, the less flare you have the more effective this will be, if you know how to take advantage of this you can create hold and your move will be outside. Then off course this will be for a house shot so it doesn’t matter much, 3.5” should be stronger... in these type of balls changes in surface will be much more important.
Silver Level Coach
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
Kegel KCMP1 and KCMP2 Completed /Approved Exam
Kegel KCMP3 Completed
Kegel Certified Pro Shop Operator
Free agent
- Mongo
- Certified Coach
- Posts: 471
- Joined: March 13th, 2014, 5:33 am
- THS Average: 225
- Positive Axis Point: 4 1/2" over, 1 1/2" up
- Speed: 18 MPH
- Rev Rate: 375
- Axis Tilt: 12
- Axis Rotation: 80
- Preferred Company: DV8/Radical
Re: Hammer purple urethane
It's urethane, I woudln't worry too much about it. It's going to hook early and roll so long as you keep the surface fresh on it.
USBC Silver Certified Coach
JMerrell wrote:Mongo,
We need to work on getting that teddy bear body of yours more open throughout the approach.
-
- Member
- Posts: 41
- Joined: March 22nd, 2016, 7:50 am
- Preferred Company: storm
Re: Hammer purple urethane
I Really appreciate guys you to take the time and answered my question. I will try 40 x 4 1/2 x 50
and see what happen, I want some flare in the ball and going to try with 4 1/2 to pin to pap
I have some balls with 3.5 distance to pap and work good for my but. I want to try something different this time I guess.
Thanks much for your advice, really appreciated.
and see what happen, I want some flare in the ball and going to try with 4 1/2 to pin to pap
I have some balls with 3.5 distance to pap and work good for my but. I want to try something different this time I guess.
Thanks much for your advice, really appreciated.