Page 1 of 1
Recommended layouts for low tilt/med-High Axis Rotation
Posted: August 28th, 2018, 12:33 am
by fufu
Bowler:
Speed > Revs
Tilt: 3*
AR: 70*
PAP: 5 3/8>, 1 7/8^
Balls to be drilled:
Rotogrip Idol
Storm Code Red
Rotogrip Winner
I’ve got sums near 90*. Ratios 1.5:1 to 1.25:1.
Initial Thoughts:
Idol: XX by 4 x 40.
Code Red: 60 x 3.5 x 30
Winner: XX by 4.5 x 35
How close do you guys think I am?
Re: Recommended layouts for low tilt/med-High Axis Rotation
Posted: August 28th, 2018, 1:22 am
by EricHartwell
fufu wrote:Bowler:
Speed > Revs
Tilt: 3*
AR: 70*
PAP: 5 3/8>, 1 7/8^
Balls to be drilled:
Rotogrip Idol
Storm Code Red
Rotogrip Winner
I’ve got sums near 90*. Ratios 1.5:1 to 1.25:1.
Initial Thoughts:
Idol: XX by 4 x 40.
Code Red: 60 x 3.5 x 30
Winner: XX by 4.5 x 35
How close do you guys think I am?
Looks like a pretty good 3 ball set.
Without knowing the actual Speed and Revs I have to take your word for the Speed to Rev decision to start the Totals at 85*
I would line them up from strongest to weakest. I agree with the layouts for the Symmetricals.
2:1 Ratio for such low tilt with high rotation I would lower the Ratio to burn off the rotation earlier and more gradual rather than skid snap all on the backend. I would stretch out the Range to 1:1 Ratio on the low end. In keeping with your Idea of Benchmark Totals for the Code Red I suggest a Control Ratio to go with it.
Code Red: 45 x 3.5 x 45
Idol: XX by 4 x 40.
Winner: XX by 4.5 x 35
Use the code Red Dull 1000 grit, Idol use a Satin type finish 2000-3000 and the Winner Shiny at 4000.
Re: Recommended layouts for low tilt/med-High Axis Rotation
Posted: August 28th, 2018, 1:48 am
by fufu
EricHartwell wrote:
Looks like a pretty good 3 ball set.
Without knowing the actual Speed and Revs I have to take your word for the Speed to Rev decision to start the Totals at 85*
I would line them up from strongest to weakest. I agree with the layouts for the Symmetricals.
2:1 Ratio for such low tilt with high rotation I would lower the Ratio to burn off the rotation earlier and more gradual rather than skid snap all on the backend. I would stretch out the Range to 1:1 Ratio on the low end. In keeping with your Idea of Benchmark Totals for the Code Red I suggest a Control Ratio to go with it.
Code Red: 45 x 3.5 x 45
Idol: XX by 4 x 40.
Winner: XX by 4.5 x 35
Use the code Red Dull 1000 grit, Idol use a Satin type finish 2000-3000 and the Winner Shiny at 4000.
Thanks for your response.