Looking to pick up a 14 lb. Motiv Venom Shock and drill the ball to use for a down and in shot. I have a Strike King drilled with a motion hole but this does not work so well in the fresh THS house shot. I also have balls which I can swing playing 15 board and deeper. For example, #14 MoRich Craze at 60x2.25x40 P2. Also, I have a #14 Storm VG at 40x4x40 P2. Now this one I never use due to the short oil THS league conditions.
Is the Motiv Shock a good candidate? I don't think that I need very high total differential for this purpose. All my current equipment is pearled and they go long and break sharp due to my slow speed and high rotation. Thus I thought maybe a solid would help better with starting sooner but continue through the pattern.
I am thinking something like 60 x 3 x 70 for the Shock. What do you suggest? Thanks.
Help with a down and in ball and drill
Moderator: Moderators
-
- Member
- Posts: 130
- Joined: October 3rd, 2010, 3:39 pm
- THS Average: 175
- Positive Axis Point: Right Handed - 5" over 1/2" up
- Speed: 14 mph off hand
- Rev Rate: 300
- Axis Tilt: 17
- Axis Rotation: 75
- Heavy Oil Ball: Storm Virtual Gravity 40x4x40
- Medium Oil Ball: MoRich Frenzy 70x5.5x60 P3; MoRich Craze 60x2.25x40 P2
- Light Oil Ball: Radical Cyclops 115x1.75x45; Low Flare
Help with a down and in ball and drill
Right handed
Lanes - synthetic;
14 mph off hand
Revs 300 rpm
AR - 50 to 70 degrees
AT - 17 degrees
PAP - 5" over 1/2" up
Lanes - synthetic;
14 mph off hand
Revs 300 rpm
AR - 50 to 70 degrees
AT - 17 degrees
PAP - 5" over 1/2" up